«30 in 30» — an award from HSE University in Nizhny Novgorod, commemorating the university’s 30th anniversary and celebrating the achievements of its distinguished alumni. The «Layers of Time» statuette was designed as a symbol of development, generational continuity, and professional success. Its multilayered construction reflects the accumulated experience and the contribution of each graduate to the university’s history.
Concept
«Layers of Time”—a statuette for the HSE „30 in 30“ Award in Nizhny Novgorod.The concept is based on the number 30, constructed from several layers of transparent and blue acrylic. Each layer symbolizes a new stage in the university’s development, the knowledge accumulated, and the achievements of its graduates. Their layering creates visual depth, reflecting HSE’s 30-year history and the continuity of generations.
Idea
The idea behind the statuette is to illustrate how the university serves as a launching point for future achievements. The dynamic composition conveys the energy of the younger generation—its drive for development and the diversity of professional paths. The award emphasizes the individual success of each laureate and their connection to the university.
Front view
Side view
side view
Rear view
Material
The statuette is crafted from transparent and blue sheet acrylic. The elements are cut using a laser and assembled in layers. The base is made of transparent acrylic, and the plaque for personalized engraving is made of metallic plastic. The materials and technology were chosen keeping in mind the cost restriction of up to 3,000 rubles per unit.
Dimensions
Statue Dimensions: Height — 137 mm, Width — 132 mm. The compact desk format ensures stability, ease of presentation, and storage of the award. Dimensions are approximate and were selected with consideration for the cost limitation per unit.
Production
For a run of 50 units, we propose laser cutting transparent and blue sheet acrylic, followed by edge polishing and layered assembly.Preliminary estimate—2,900 ₽ per award.— Materials (acrylic) — 800 ₽ — Laser cutting — 650 ₽ — Polishing and finishing — 350 ₽ — Assembly and gluing — 250 ₽ — Personal engraving and plaque — 200 ₽ — Packaging — 150 ₽ — Production preparation — 200 ₽ — Contingency — 300 ₽This estimate is tentative, based on a run of 50 units, and is not manufacturer-confirmed. A 1:1 sample is required before production launch to verify transparency, joint strength, and structural stability.
The «Layers of Time» statuette combines modern design, the symbolism of the «30 in 30» award, and practical manufacturability.The visualization was created using AI.
